Kawasaki VERSYS 1000 Manual De Servicio página 45

Periodic Maintenance Procedures
•
Remove the vinyl bag on the pipe. foreign materials on
•
Check that there are no flaws, burrs, and adhesion of
the delivery pipe [A].
•
Replace the fuel hose with a new one.
•
Run the fuel hose correctly (see Cable, Wire, and Hose
Routing section in the Appendix chapter).
•
Insert [A] the fuel hose joint [B] straight onto the delivery
pipe until the hose joint clicks. Push [C]
•
the joint lock [D].
•
Push and pull [A] the fuel hose joint [B] back and forth more than two times
and make sure it is locked and does
not come off.
Leaking fuel can cause a fire or explosion resulting in severe burns.
Make sure the fuel hose joint is installed correctly on the delivery pipe
and that it doesn't leak.
If it comes off, reinstall the hose joint.
•
Install the removed parts (see appropriate chapters). Start the engine
•
and check the fuel hose for leaks.
WARNING
PERIODIC MAINTENANCE 2-23