Kawasaki VERSYS 1000 Manual De Servicio página 50

Ocultar thumbs Ver también para VERSYS 1000:
Tabla de contenido

Publicidad

2-28 PERIODIC MAINTENANCE
Periodic Maintenance Procedures
W
ater Hose and O-ring Replacement
Drain the coolant (see Coolant Change). Oil Passage
Remove:
Cover [A]
Thermostat Housing Cover [B] (see Thermostat Re- moval in the Cooling
System chapter)
Water Pump Housing [C] (see Water Pump Removal in
the Cooling System chapter)
Replace the hoses [D] and O-rings [E] with new ones. Apply grease or soap
and water solution to the new O
- rings.
Run the new hoses according to Cable, Wire, and Hose
Routing section in the Appendix chapter. Tighten:
Torque - Water Hose Clamp Screws: 3.0 N·m (0.31 kgf·m,
27 in·lb)
Install the removed parts (see appropriate chapters).
Fill the coolant (see Coolant Change). Check the
cooling system for leaks.

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido