Altimeter-Barometer Use - Suunto OBSERVER TT Guía De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 134
minutes, then every 10 seconds or less;
A logbook, recording 99 single logs including the total ascent, total descent, number
of runs, and the duration of the log.
Altimeter-Barometer use feature
To view and use the Altimeter function:
Press the [MODE] button until the indicator is directly below ALTI.
In the ALTIMETER mode the fields display data as shown in Fig. 3.1:
a) The vertical ascent or descent rate in meters or feet per min;
b) The current altitude in increments of 1 meters or 3 feet (depending on the unit of
measure selected);
c) Altimeter mode and altimeter use indicator;
d) The current time; and
e) The outer circumference of the LCD graphically displays lit segments representing
the altitude over a full thousand meters or feet (one complete circle is equivalent to
1000 m or 1000 ft)

3.1 ALTIMETER-BAROMETER USE

The Observer can be used as either a weather station or altimeter. This operating
feature is chosen in the setup process while in the altimeter or the barometer mode. To
toggle between these icon positions, hold the [Select]-button in for 2 seconds and then,
press the [Quick] or [On Off]-button to lock in one of the functions.
The icon for this function is displayed under the corresponding mode indicator (ALTI or
BARO) in a half-moon
is being used as a weather station (BARO) or altimeter (ALTI).
NOTE: This is different than moving between ALTI and BARO main modes.
THIS IS IMPORTANT.
The use indicator has to be in ALTI position, otherwise the altitude display
is fixed.
18
shape. The position of the icon indicates whether the Observer

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Observer lttObserver stObserver srObserver sr black

Tabla de contenido