To View The Chronometer Memory - Suunto OBSERVER TT Guía De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 134
The split time is indicated by the abbreviation "SPL" (SPL = split) in the bottom field
displaying for five seconds before it returns to showing the run time.
NOTE: You can continuously press the [QUICK] button during this activity to record and
display new lap and split times up to 99 times.
3. Press the [ON OFF] button to stop the chronometer.
4. Press the [QUICK] button to reset the chronometer to zero once the chronometer is
stopped.
NOTE: The timing of another event cannot start until the stopwatch has been zeroed.
NOTE: Starting the timing of another event removes the data of the previous timing from
the memory.
NOTE: When the timing is going on, the chronometer remains active in the background
when you switch to other modes or sub modes. A stopwatch icon is displayed in the
bottom field to indicate that the chronometer function is active.

2.2.2 To View the Chronometer Memory

While in the chronometer mode, press the [SELECT] button for 2 seconds. This sub
mode features three main screens. You use the [ON OFF] button to advance through the
screens and the [QUICK] button to scroll back to the first screen.
The first screen (Fig. 2.3) displays:
a) The year of the timed event;
b) The time the event started to record;
c) The date of the timed event;
d) The stopwatch icon; and
e) The text "MEM" to indicate the memory view.
You press the [ON OFF] button to move to the next screen.
The second screen (Fig. 2.4) displays:
15

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Observer lttObserver stObserver srObserver sr black

Tabla de contenido