Opex Falcon+ Manual Del Operador página 124

4.2.6. Information Windows
Right-clicking on the information tabs will display a menu of all available
categories based on the current job settings (see Figure 4-27).
Right-click anywhere here
to bring up the list
Available info window tabs
The default location for the Information window is in the lower right corner of
the Run screen. Select the tabs in the Information window to display the
following:
The General tab displays job information such as the start time and operator
name. The General Information will not change depending on the item.
The Batch tab includes data such as the set number, pages in the batch, and
the date and time the batch was created, received, and processed.
The Piece tab provides information about the selected thumbnail. It may
include the bin the piece was sorted to, size dimensions, and page type.
The Graph tab displays a performance graph allowing you to select between
pages per hour, or sets per hour.
The Printer tab provides information on the status of the ink jet audit trail
printers. Check the printer tab if audit trails are not printing correctly.
The Rejects tab displays a list of all the possible rejects, and a count of the
rejects that happened during a run.
The Throttle tab displays throttling status notifications that occur during a run.
62
Figure 4-27: Selecting Info Window Tabs
Falcon+ Operator Manual
OPEX Corporation
Operation