Opex Falcon+ Manual Del Operador página 158

MFD Override
button
4.3.4. Assigning a Page Type
You can manually assign a page type to the next item you scan by pressing the
appropriate Page Type button (see Figure 4-40). These buttons are only
available if they have been activated in the general job parameters.
In a structured job, the page type buttons will also indicate which page types
the system expects to see next. For example, if the job expects to see either a
batch ticket or a stub to start a set, their corresponding page type buttons will
appear in color (see Figure 4-41).
Figure 4-41: Sample Page Type Buttons (structured job)
4.3.5. Page Type Locking
Depending on the job setup, you may also have the ability to apply a page type
to several items. With page type locking enabled, you can press the page type
button twice and "lock" the page type button down (see Figure 4-42). Once the
button is "locked," all the subsequent pieces will be classified as this page type
until the end of the set/transaction or when the lock is released.
Operation
Figure 4-39: MFD Override Button
Figure 4-40: Sample Page Type Buttons
Falcon+ Operator Manual
OPEX Corporation
79