Opex Falcon+ Manual Del Operador página 140

Table 4-5: Piece Information - Detailed View
Parameter
Character Read
OCR Read 1 - 5
Magnetic MICR
Read
Barcode Results
Barcode Results 1
Barcode Results
2-6
Marks Results
Bin Number
Front Blank Page
Status
Back Blank Page
Status
Page Ref ID 1
Page Ref ID 2
Page Ref ID 3
Processing Time
Used
Unique Piece ID
70
Description
Combined results of magnetic and optical MICR reads;
Generic display of OCR1 or MICR character reads on a
given piece to keep jobs consistent. If more info is desired,
bring up the info panel for all the OCR and MICR details.
Results of OCR regions 1-5, as per pagetype configuration.
Results of MICR region, as per pagetype configuration.
Results of Barcode 1 (same as Barcode 1 below, but visible
by default).
Results of Barcode 1 (same as Barcode Results above, but
not visible by default).
Results of Barcode 2-6, as per page type configuration.
Indicates whether or not a mark was detected for those
marks defined in the page type.
Final destination of the selected piece.
Indicates whether or not the front side of the selected item
was judged blank. Also states what % of pixels were filled.
Indicates whether or not the back side of the selected item
was judged blank. Also indicates what percentage of pixels
were filled.
Page RefID. Visible in RunScreen if RefID #1 is defined in
Job. Always visible in Batch Editor.
Page RefID. Visible in RunScreen if RefID #2 is defined in
Job. Always visible in Batch Editor.
Page RefID. Visible in RunScreen if RefID #3 is defined in
Job. Always visible in Batch Editor.
Percentage of allowable time used for this piece. Allowable
time is a function of track speed.
Ordinal number per execution. Used mainly for diagnosis.
Falcon+ Operator Manual
OPEX Corporation
Operation