Descargar Imprimir esta página

How The Falcon+ Works; Software - Opex Falcon+ Manual Del Operador

Ocultar thumbs Ver también para Falcon+:

Publicidad

Idiomas disponibles

Idiomas disponibles

3.4. How the Falcon+ Works

The Falcon+ scanner is controlled by a single, Windows 10 driven Host
Computer. The operator interacts with the system via the CertainScan software
and simply drops items onto the conveyor. The system scans the items based
on the current job parameters. The scanner can capture MICR and OCR infor-
mation, print audit trails on items, and sort them to a specified bin.

3.4.1. Software

The Falcon+ uses two software applications which control the system:
INtime Controller
CertainScan software and controls all machine related functions, such as
monitoring sensors, triggering gates, and turning motors on and off. The INtime
Controller runs in its own real-time operating system, called INtime. There is no
need to access the INtime controller, as the window should never been closed.
CertainScan
manages the non-machine related functions performed by the scanner.
CertainScan provides an interface for setting up jobs, page types, audit trails,
and for running jobs. This is the main interface with the machine.
26
The INtime Controller runs in the background of the
The CertainScan software interfaces with the Controller and
Figure 3-2: CertainScan Run Screen Example
Falcon+ Operator Manual
OPEX Corporation
Overview

Publicidad

loading