Opex Falcon+ Manual Del Operador página 226

b. Swing open the paper guide to expose the printer assembly.
Note: If you have the optional graphics printer installed, see
replace the graphics printer:" on page 113
To remove/replace a standard printer cartridge:
1. Pull the tab on the rear of the printer cartridge and rotate outward (see
Figure 5-4).
2. Insert the new cartridge by tipping the front end of the cartridge in first, and
then pushing in the rear of the cartridge until it "clicks" into place.
3. Go to Diagnostics > Printer and click Replace Ink Cartridge to reset the ink
drop count to zero.
To remove/replace the graphics printer:
1. Open the stacker door by disengaging the latch handle.
2. Loosen the thumbscrew shown (see Figure 5-5).
Maintenance
for directions.
Figure 5-4: Printer Cartridge
Falcon+ Operator Manual
OPEX Corporation
"To remove/
113