Opex Falcon+ Manual Del Operador página 134

Table 4-4: Batch Information - Detailed View
Parameter
Set Sequence
Number
Group Number
Group Sequence
Number
Scan Sequence
Number
Pages in Batch
Batch Creation
Date
Batch Received
Date
Batch Processed
Date
Batch RefIDs
ScanLink Vendor
Batch ID
ScanLink
Customer Batch ID
Data File Path
Image File Path
Snippet File Path
Operation
Description
Ordinal number of selected item within its set/transac-
tion.
Number of groups.
Ordinal number of selected item within its group.
For the selected item. Ordinal number with regard to
scanning. Rescans will change this number for a given
item.
Including batch ticket & voided items.
Date (and time) the batch was created (when first piece
was scanned).
Set by operator, otherwise today's date.
Set by operator, otherwise today's date.
Shown only if RefID enabled configured in batch
parameters.
Shown only if RefID enabled configured in batch
parameters.
Shown only if RefID enabled configured in batch
parameter.
As per job's batch parameters.
As per job's batch parameters.
As per job's batch parameters.
Falcon+ Operator Manual
OPEX Corporation
67