Opex Falcon+ Manual Del Operador página 290

The Stops section lists the following:
Table 6: Reasons for stops
Feeder Jammed
Upper Skew Detect
Sensor Blocked
Middle Skew Detect
Sensor Blocked
Lower Skew Detect
Sensor Blocked
System Entry Sensor
Blocked
Vertical Turn Sensor
Blocked
Stacker Entry Sensor
Blocked
Bin 2 Gate Sensor
Blocked
Results when the lower skew detect sensor has
been blocked for a specified period of time. Both
the feed jammed time and feed streaming time
define this period.
Results when the upper skew detect sensor is
blocked by something when the system is
attempting to start up.
Results when the middle skew detect sensor is
blocked by something when the system is
attempting to start up.
Results when the lower skew detect sensor is
blocked by something when the system is
attempting to start up.
Results when the system entry sensor is
blocked by something when the system is
attempting to start up.
Results when the vertical turn sensor is blocked
by something when the system is attempting to
start up.
Results when the stacker entry sensor is
blocked by something when the system is
attempting to start up.
Results when the bin 2 gate sensor is blocked
by something when the system is attempting to
start up.
Falcon+ Operator Manual
OPEX Corporation
145