MSA AirHawk II Manual De Instrucciones página 5

CARRIER AND HARNESS
The carrier consists of a backplate, a cylinder strap with
buckle to hold the cylinder, and a harness, consisting of
shoulder straps, chest strap (optional), adjustable
pullstraps waist-strap, shoulder pads (optional) and belt
mounted regulator retainer.
LUMBAR PAD (OPTIONAL)
The lumbar pad with a flared design is designed to
provide a cushion between the wearer and harness. The
flared design evenly distributes cylinder weight across the
wearer's hips.
RESCUE BELT (OPTIONAL)
The MSA Fire Service Rescue Belt is a personal escape
system integrated into the carrier and harness assembly.
The system is designed to provide the user with a means
of escape from an elevated position. Care and use
instructions are provided in User Instructions P/N
10052748 (P/N 10115063 for Rescue Belt II).
DESCRIPTION
FACEPIECE
Two facepieces are available in three sizes.
•
The Ultra Elite Facepiece
•
The Advantage
Only Ultra Elite Hycar Facepieces (model numbers 7-935-
7, 7-935-8, and 7-935-9) have been tested against and
meet CBRN live agent test requirements. Silicone
facepieces are NOT CBRN-approved.
The facepieces have a low-resistance, pressure-demand
exhalation valve designed for easy cleaning. An inhalation
check valve in the inlet housing keeps moisture and
contaminants out of the mask mounted regulator. The
Ultra Elite Facepiece has a speaking diaphragm for clear,
short-range communication.
5
® 4000 Facepiece
TAL 1211 (L) Rev. 4 - 10088650