MIRKA ROP2-312NV Instrucciones De Manejo página 7

Product Configuration/Specifications: 10,000 RPM Random Orbital Polisher
Pad
Model
Orbit Size mm
Number
(inch)
77 (3) ROP2-312NV
12,0 mm
(1/2 in.)
125 (5) ROP2-512NV
*The noise test is carried out in accordance with EN ISO 15744:2008 - Hand-held non-electric power tools -- Noise measurement code
-- Engineering method (grade 2).
**The vibration test is carried out in accordance with EN 28662-1 Hand-held portable power tools – Measurement of vibration at
the handle. Part 1: General and EN 8662-8, 1997 Hand-held portable power tools – Measurement of vibration at the handle. Part 8:
Polishers and rotary, orbital and random orbital sanders.
Specifications subject to change without prior notice.
*The values stated in the table are from laboratory testing in conformity with stated codes and standards and are not sufficient for risk
evaluation. Values measured in a particular work place may be different than the declared values. The actual exposure values and
amount of risk or harm experienced to an individual is unique to each situation and depends upon the surrounding environment, the way
in which the individual works, the particular material being worked, work station design as well as upon the exposure time and the physi-
cal condition of the user. KWH Mirka, Ltd. cannot be held responsible for the consequences of using declared values instead of actual
exposure values for any individual risk assessment.
Further occupational health and safety information can be obtained from the following websites:
http://europe.osha.eu.int (Europe)
http://www.osha.gov (USA)
Product Net
Height mm Length mm
Weight kg
(inch) (inch)
(pounds)
1,18 (2,6) 108,2 (4,26) 251,9 ( 9,9)
1,23 (2,71) 109,6 (4,31) 277,0 (10,9)
*Noise Power
Air Consumption
Level watts
LPM
dBA (HP)
80 276 (0,37)
81 343 (0,46)
6
**Vibration **Uncertainty
(scfm) Level m/s2
538 (19) 5.9
594 (21) 5.8
Factor
1.5
1.5