Important - MIRKA ROP2-312NV Instrucciones De Manejo

77 mm (3 in.) and 125 mm (5 in.) 10,000 RPM Two-handed Random Orbital Polisher (See "Product Configuration/Specifications" Table
for particular Model) to which this declaration relates is in conformity with the following standard(s) or other normative document(s) EN
ISO 15744:2008. Following the provisions of 89/392/EEC as amended by 91/368/EEC & 93/44/EEC 93/68/EEC Directives and
08.01.2010 Jeppo
Place and date of issue
Operator Instructions
Includes – Parts Page, Parts List, Polisher Spare Parts Kits,
Warranty, Please Read and Comply, Proper Use of Tool, Work
Stations, Putting the Tool Into Service, Operating Instructions,
Product Configuration/Specifications Tables, Trouble Shooting
Guide, Service Instructions
Manufacturer/Supplier
KWH Mirka Ltd.
66850 Jeppo, Finland
Tel: + 358 20 760 2111
Fax: +358 20 760 2290
Recommended Airline
Size - Minimum
10 mm 3/8 in
The warranty terms are as follows:
- 12 months on KWH MIRKA air tools.
- 3 months on tool parts repaired by KWH MIRKA.
The warranty period commences at the date of purchase. The warranty only covers imputable material and manu-
facturing defects.
Parts replacement or repair during the warranty period is free of charge if carried out by an official KWH MIRKA
service center.
Freight costs are always to be paid by the purchaser.
The warranty does not include:
Normal wear and tear i.e.
- Bearings, backing pad, shroud, rotor, vanes, swivel fitting, muffler
Overloading or improper use i.e.
- Dropping the tool in water
- Damage caused by misuse
- Damage caused by anything other than defects in material and workmanship
- Dropping or other excessive impact
Normal maintenance and service that can be carried out by the operator:
- Changing of the backing pad
- Changing of the spindle bearing
- Changing of the exhaust fitting
- Changing of the shroud
Please Note! All other service operations must be carried out by an authorized Mirka service center.
The warranty only covers the local repair, not the tool replacement.
Compensation for downtime and loss of production are explicitly not included in the warranty.
Repair claims under warranty will only be honored if the tool is returned in its original assembled state. Any disas-
sembly will void the warranty.
The warranty can only be submitted to the dealers where the tool was purchased.
Declaration of conformity
KWH Mirka Ltd.
66850 Jeppo, Finland
declare on our sole responsibility that the products
consolidating Directive 2006/42/EC
Tom Nordström
Name

Important

Read these instructions care-
fully before installing, operating,
servicing or repairing this tool.
Keep these instructions in a safe
accessible location.
Required Personal Safety Equipment
Recommended Maximum
Hose Length
8 meters 25 feet
Warranty
4
MIRKA 10,000 RPM Two-handed
77 mm (3 in.) and 125 mm (5 in.)
Random Orbital Polisher
Signature or equivalent marking of authorized person
Safety Glasses Breathing Masks
Safety Gloves Ear Protection
Maximum Working Pressure
Recommended Minimum
Air Pressure
6.2 bar 90 psig
NA NA