Emergency Starting - TOHATSU MFS 4C Manual Del Propietário

Ocultar thumbs Ver también para MFS 4C:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

34
ENGINE OPERATION
ENOW00064-0
Engine may be hot immediately after operat-
ing and could cause burns if touched. Allow
engine to cool down before attempting to
carry the outboard.
6. After engine starting, return the
choke knob while check the engine
speeds. if the engine speeds unstable,
pull the choke knob to operated.
7. Check the cooling water from cooling
water check port.
7
1
1. Cooling water check port
ENOM00042-A

Emergency starting

ENOW00099-A
When the emergency starter rope is used for
starting engine;
Start in gear protection does not work. Be
sure to shift is at neutral position. Other-
wise the engine will move the boat imme-
diately and cause personal injury.
Be careful that your clothes or other
items do not get caught in the rotating
engine parts.
To prevent accident and injury by rotating
parts, do not re-attach flywheel cover
and the top cowl after the engine has
been started.
Do not pull starter rope if any bystander is
b e h i n d . T h e a c t i o n c a n i n j u r e t h e
bystander.
CAUTION
ENOF00437-1
WARNING
Attach engine stop switch lanyard to
clothing or any par t of body like arm
before starting engine.
1. Remove the top cowl.
2. Disconnect the rink of the starter
lock rod.
3. Remove the bolts (3 pcs) and remove
the recoil starter.
4. Insert the knotted end of the starter
rope into the notch in the flywheel
and wind the rope around the fly-
wheel several turns clockwise.
1
ENOF01521-0
ENOF00433-0
ENOF00434-0

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Mfs 5cMfs 6c

Tabla de contenido