Product Information; Type Key; Technical Data - salmson SIL Serie Instalacion Y Puesta En Servicio

5

Product information

5.1

Type key

5.2

Technical data

Property
Rated speed
Nominal diameters DN
Pipe and pressure measurement connec-
tions
Permissible min./max. fluid temperature
Ambient temperature min./max.
Storage temperature min./max.
Maximum permitted operating pressure
Insulation class
Protection class
Table 1: Technical data
Installation and operating instructions SIL, DIL, PBS
The type key consists of the following elements:
Example: SIL 208-13/5.5
DIL 208-13/5.5
SIL Flange-end pump as single pump
DIL Flange-end pump as double pump
2 Number of poles, motor
08 Nominal diameter DN of the flange connection [cm]
13 Nominal impeller diameter [cm]
5.5 Rated power [kW]
Example: PBS 65-140/5.5/2/13
PBS Flange-end pump as MonoBloc pump
65 Nominal diameter DN of the flange connection
(pressure side) [mm]
140 Maximum impeller diameter of the pump family [mm]
5.5 Rated power [kW]
2 Number of poles, motor
13 Nominal impeller diameter [cm]
Value
50 Hz version
• SIL/DIL/PBS (2-/4-pole):
2900 or 1450 rpm
• SIL (6-pole): 725 rpm
60 Hz version
• SIL/DIL/PBS (2-/4-pole):
3480 or 1750 rpm
SIL: 32 to 200 mm
DIL: 32 to 200 mm
PBS: 32 to 150 mm (pressure side)
PN 16 flange in accordance with
DIN EN 1092-2
with pressure measurement
connections Rp 1/8 in accordance
with DIN 3858
-20 °C to +140 °C
0 to +40 °C
-20 °C to +60 °C
16 bar (version... -P4: 25 bar)
F
IP55
English
Remarks
Depending on pump type
Depending on pump type
Depending on fluid
Lower or higher ambient
temperatures on request
Version...-P4 (25 bar) as special
version at additional charge (avail-
ability depends on the pump type)
35