Sun Microsystems Fire V480 Guía De Instalación Y Montaje página 15

3. With the help of an assistant, install a slide assembly on the front and back
vertical rails on each side of the rack.
a. Use the holes you marked in Step 1.
b. Position one slide assembly on the inside of the cabinet with the front (short)
mounting bracket at the front of the rack.
c. Using two Phillips 10-32 panhead screws for each bracket, attach the front
mounting bracket to the front rail of the cabinet and attach the back (long)
mounting bracket of the same slide assembly to the back rail of the cabinet
(count the rack rail holes to ensure that you are matching the holes used on the
front rail).
d. Repeat these steps for the other slide assembly.
1 0 - 3 2
Chapter 1 Installing a Sun Fire V480 Server Into a 4-Post Cabinet en-11