Sun Microsystems Fire V480 Guía De Instalación Y Montaje página 6

Checklist of 4-Post Rackmounting and
Setup Tasks
TABLE 1-1
Step
1
2
3
4
5
6
7
8
9
10
11
en-2 Sun Fire V480 Server Setup and Rackmounting Guide • February 2002
Overview of 4-Post Rackmounting and Setup Steps
Task
Unpack the server, the ship kit,
and the rackmounting kit.
Check that you have the required
parts for rackmounting.
Install the inner glides on the
chassis.
Prepare the cabinet.
Locate the mounting holes.
Install the slide assemblies into
the cabinet.
Install the server into the cabinet.
Install the cable management arm.
Connect the power cords.
Connect a twisted-pair Ethernet
(TPE) cable.
Restore the cabinet.
Refer to:
"Unpack the Server" on page 3
"Inventory for 4-Post Rackmounting" on
page 4
"Attach the Inner Glides to the Chassis" on
page 6
"Prepare the Cabinet" on page 7
"Locate the Mounting Holes" on page 8
"Install the Slide Assemblies" on page 10
"Install the Server Into the Cabinet" on
page 14
"Install the Cable Management Arm" on
page 30
"Connect the Power Cords" on page 34
"Connect a Twisted-Pair Ethernet Cable" on
page 37
"Restore the Cabinet" on page 39