Tabla De Contenido - Sun Microsystems Fire V480 Guía De Instalación Y Montaje

1
Sun Fire V480 Server Setup and Rackmounting Guide
C H A PT E R
Installing a Sun Fire V480
Server Into a 4-Post Cabinet
This chapter shows you how to install a Sun Fire™ server into a 4-post Sun™
expansion cabinet or other EIA-compliant 19-inch (48.26-cm) wide cabinet. If you are
installing a Sun Fire V480 server into a 2-post rack, see Chapter 2.
The 4-Post Rackmounting Overview included with your documentation set and the
service label affixed to the top of the server chassis illustrate the rackmounting steps
in a convenient graphical overview.
This chapter contains the following procedures and information:
"Checklist of 4-Post Rackmounting and Setup Tasks" on page 2
"Unpack the Server" on page 3
"Attach the Inner Glides to the Chassis" on page 6
"Prepare the Cabinet" on page 7
"Locate the Mounting Holes" on page 8
"Install the Slide Assemblies" on page 10
"Install the Server Into the Cabinet" on page 14
en-1