Sun Microsystems Fire V480 Guía De Instalación Y Montaje página 40

5. Attach a strain relief to each AC power cord.
Use the strain relief to prevent accidental or inadvertent removal of an AC power
cord from its inlet. The strain relief is a plastic tie-wrap and pedestal that is inserted
into the back panel of the server. Use these reliefs to manage the power cords after
you have installed the cords into the AC inlets in the server.
To use a strain relief, press the tab to release the tie-wrap. Wrap the loose end of the
tie-wrap around the AC power cord and thread the tie-wrap through the opening in
the relief pedestal. Pull the end of the tie-wrap to tighten it.
en-36 Sun Fire V480 Server Setup and Rackmounting Guide • February 2002