Sun Microsystems Fire V480 Guía De Instalación Y Montaje página 42

2. Plug in a Category-5 unshielded twisted-pair (UTP) cable to the appropriate RJ-45
connector.
You should hear the connector tab snap into place. The UTP cable length must not
exceed 328 feet (100 meters).
3. Plug in the other end of the TPE cable to the RJ-45 outlet to your Ethernet
network.
Caution – Ensure that you plug this connector into the TPE RJ-45 port and not a
phone port. You can damage your TPE equipment if you use the incorrect port. You
should hear the connector tab snap into place when it is inserted into the correct
port.
See your network administrator if you need more information about how to connect
to your network.
en-38 Sun Fire V480 Server Setup and Rackmounting Guide • February 2002