Siemens SITRANS F Serie Manual De Usuario página 16

Installing/Mounting
2.2 Mounting the Transmitter
①
②
③
Figure 2-1
Note
Use conduit fittings or cable glands on all cables.
Install weather tight seals at all unused holes using proper cable conduit and close
additional holes to IP65 standards.
14
④
Standpipe
⑤
Transmitter
⑥
Mounting Plate
Pipe Mounting and Mounting Locations for Transmitter
CAUTION
Cable Entry Ports
Mounting Flange (also use for wall mounting)
U-Bolt Assembly for standard 2-inch standpipe (6 cm / 2 in)
Operating Instructions, 7/2010, A5E03086486-02
FUS1010 IP65 NEMA 4X