Select a Meter Type
1. Press the <MENU> key and select the Meter Type.
2. Press the <Right Arrow> and scroll to [2 Channel Flow]
3. Press <ENT> to select. Press <Right Arrow> to select a different meter function, if
Create a Site
1. At the [Channel Setup] menu press the <Right Arrow>.
2. Press the <Down Arrow> to select the [Create/Name Site] and enter a Site name.
FUS1010 IP65 NEMA 4X
Operating Instructions, 7/2010, A5E03086486-02
Note
Select [2 Channel Flow] if measuring two different pipes and [Dual Path Flow] if sensors
are mounted on the same pipe.
desired then press <ENT>.
①
Select for summing or subtracting flow from two different pipes.
②
Select for measuring two different pipes. (Not available for all models.)
③
Select if two sensors are mounted on the same pipe.
Note
Before proceeding make sure that English or Metric units have been selected.
Connecting
3.4 Programming the Transmitter
25