BH FITNESS G6510O Guía De Uso página 16

-CALORIES:
estimated number of calories that
have been burnt off up until now. This
calculation is based on the energy
being produced and the weight and
age values provided by the user.
-INCLINATION:
machine's current level of inclination.
The machine
inclination (0 to 15). The degree of
inclination can be changed by using
the incline Λ Λ Λ Λ and incline V V V V keys. At
the end of the exercise the machine
returns to a 0 inclination level.
-PULSE: This shows the user's heart
rate, assuming that this information can
be accessed through the hand-grip
sensors or the telemetric chest band.
When both of these are used together,
priority is given to the telemetric chest
band. For more information about heart
rate refer to the section entitled: Pulse
measurement; chest band and hand-
grip.
KEYPAD (Fig.3).
The function of each key is listed
below.
This electronic monitor features a
simple easy-to-use
keypad consists of: (D) program keys;
(F) Function keys; (G) Number keys.
(D). – Program
Program 2; Program 3; Program 4;
Program 5; Program 6; Program 7;
Program 8; User program (User); Test
Man program; Test Woman program;
H.R.C (Heart Rate Constant) program.
(F) - Function keys– cool down;
pause; reset; down▼; enter; up▲;
incline Λ Λ Λ Λ ; incline V V V V ; stop; quick /
This shows
This displays
has 15 levels
keypad.
keys.- Manual;
the
start; speed
select a particular exercise, enter
requested
exertion levels and to finish the
exercise.
(G)
the
used to enter the data requested by
the monitor.
of
-cool down.- Gradual decrease key
When the speed exceeds 10 km/h,
pressing the key will slow the speed
down by 40% over 40 seconds. When
this time has elapsed, the speed will
drop by 40% over 40 seconds. When
this time has elapsed, the speed will
drop by 50% over 30 seconds. Once
this time is up, the machine will stop.
When the speed is less than10 km/h,
pressing the key will slow the speed
down by 50% over 30 seconds. When
this time has elapsed, the speed will
drop by 50% over 30 seconds. Once
this time is up, the machine will stop.
-reset.- Reset key. This is used to
erase the data that have been entered
into the monitor when selecting a
program.
-speed –.- Key for decreasing speed.
When pressed during exercise this key
will decrease the speed of the machine
The
by one tenth of a kilometre per hour.
The speed will continue to decrease as
long as this button is being pressed.
During
programmed profiles, it is used to move
back to the previous profile screen.
-speed
When pressed during exercise this
key will increase the speed of the
machine by one tenth of a kilometre
per hour. The speed will continue to
increase as long as this button is
being pressed.
16
; speed – – – – . Are used to
data, control
- Numeric keys.- (1- 0) are
the selection
.- Key for increasing speed.
exercise
of pre-