General Warnings; Equipment Supplied - Sime PIROEMME Serie Manual De Instrucciones

1

GENERAL WARNINGS

The instruction manual is an integral
part of the product and must be given
t o t he user. Car efull y r ead t he
warnings repor ted in the manual
regarding the installation, use and
maintenance of the equipment. Please
keep the manual for future reference.
The installation must be carried out by
qualified personnel in accordance with
current standards by following the
manufacturer's instructions. Incorrect
ins t allation can cause injur y t o
persons or damage to property for
which the company cannot be held
2

EQUIPMENT SUPPLIED

The boiler is supplied in four parcels:
1 - Assembled body of the boiler with
an additional backup deflector, the
"Tes t Cer tif icat e" and t he
"Declaration of conformity" to be
kept with the boiler's documents.
2 - Casing, boiler body insulation
mattress, bypass device, bag with
clamping screws and kit with the
documents shipped in a cardboard
box.
3 - Contr ol panel shipped in a
4
liable.
Make sure the product is intact. If you
have any doubts, do no t use t he
equipment and contact the supplier.
The packaging must be disposed of in
accordance with current regulations.
Before conducting any maintenance
on the equipment, disconnect the
power supply via the system's switch.
In the event of a failure or malfunction,
turn off the equipment. Do not try to
repair it or conduct work on it yourself.
cardboard box.
4 - Fan shipped in a cardboard box.
The bag of documents related to the
boiler contains:
– Ins tr uction manual t o conduct
installation and maintenance
– Boiler technical data plate
– Module with labels to apply on the
"Declaration of conformity".
PLEASE NOTE: The technical data
1
Contact qualified technical personnel
only. Any repairs must be performed
only by using original spare parts.
Failure to comply with the instructions
above may compromise the integrity
of t he
components, t her eby causing a
potential hazard for the user's safety
for which the company cannot be held
liable.
Maintenance must be conducted on
the equipment and flue gas duct at
least once a year.
plate of the BOILER contained in the
kit with the documents is adhesive
and must applied by the installer on
one side of the casing.
The serial number of the cast iron
body is reported on a riveted plate
on one of the feet of the rear header.
To make it easier to transport, load
and unload the wood boiler, there are
special hooks to lift it on the upper
part of the boiler itself.
2
sy s t em or individual
3
4