Powerdeck; Options; Com2 Serial Port - Mettler Toledo IND246 Guia De Instalacion

1.9.3.

PowerDeck

The IND246 POWERCELL supports PowerDeck
without weights for fast installation and visual guidance for leveling the floor platform.
1.10.

Options

The following options are available for all versions of the IND246:
•
•
•
•
•
1.10.1.

COM2 Serial Port

This optional port provides RS-232 and RS-485 communication at rates from 300 to 115.2k baud.
The port is bidirectional and can be configured for various functions such as demand output,
continuous output, extended continuous output, SICS host communications or ASCII command
input (C, T, P, Z).
1-10 METTLER TOLEDO IND246 and IND246 POWERCELL Installation Manual
Figure 1-4: IND246 POWERCELL with PowerDeck Platform
COM2 Serial Port
One RS-232/485 isolated serial COM port
COM2 and DIO (relay output)
One RS-232/485 isolated serial COM port
Internal, discrete I/O (2 inputs and 4 outputs; supported in analog version only)
─
Inputs are optically isolated solid state and switch selectable as either active or passive
─
Output relays provide one normally open contact per relay
USB Port
One USB 2.0 compliant port, hardware bridge. Acts as virtual (UCP) COM port
USB and DIO (relay output)
One USB 2.0 compliant port, hardware bridge. Acts as virtual (UCP) COM port
Internal, discrete I/O (2 inputs and 4 outputs; supported in analog version only)
─
Inputs are optically isolated solid state and switch selectable as either active or passive
─
Output relays provide one normally open contact per relay
Ethernet Port
One 10/100 Ethernet port with automatic link polarity detection and correction. Supports TCP/IP socket
connection. Does not support FTP
TM
weighing platforms. These provide calibration
64084463 | 03 | 12/2017