Wall Or Column Mounting With Brackets - Mettler Toledo IND246 Guia De Instalacion

2.3.2.

Wall or Column Mounting with Brackets

Two mounting brackets and four M5 screws are included with the IND246. These can be used to
mount the terminal to a vertical surface. To mount the enclosure using these brackets follow these
steps:
2.3.2.1. AC Model
1. Open the enclosure as detailed in the Opening the Enclosure section. For steps 3 to 10, refer to
2. First, the orientation of the front panel must be reversed. This involves detaching the panel and
64084463 | 03 | 12/2017
DISCONNECT THE TERMINAL FROM AC POWER BEFORE STARTING THIS PROCEDURE.
For clarity, the illustrations do not show a load cell cable installed.
Figure 2-4.
rotating the housing, and exchanging the openings used by the power and load cell cables.
METTLER TOLEDO IND246 and IND246 POWERCELL Installation Manual
Figure 2-3: Rubber Feet
WARNING
2-3