Mettler Toledo IND246 Guia De Instalacion página 27

2.3.2.2. Battery-Powered Model
1. Open the enclosure as detailed in the Opening the Enclosure section. For steps 3 to 6, refer to
2. First, the orientation of the front panel must be reversed. This involves detaching the panel and
64084463 | 03 | 12/2017
13. Carefully rotate the housing 180 degrees and use the nuts removed in step 4 to reattach
the two grounding straps to the studs near the grip bushings (Figure 2-5). Tighten the two
nuts.
14. Reconnect the black/brown and white/blue AC power wires to the terminal plug on the main
board, in the location indicated in Figure 2-6.
Figure 2-7.
rotating the housing, and exchanging the opening used by the load cell cable:
METTLER TOLEDO IND246 and IND246 POWERCELL Installation Manual
Housing, rotated
Power wire relocated
Ground straps/hinges reconnected
Figure 2-5: Housing Reversed
Figure 2-6: AC Wire Termination
2-5