2.4.4.1.
Overview
The IND246 POWERCELL is supplied with a gland that is compatible with the POWERCELL PDX
home run cable.
Preparing the terminal for use with POWERCELL PDX load cells involves three phases:
Each of these steps must be correctly completed to ensure the correct function of the POWERCELL
PDX network.
2.4.4.2.
Preparing the Cable and Gland
1. Make sure that the un-terminated end of the POWERCELL cable is cut cleanly.
2. Mark the exterior braided armor 12"/30 cm from the end of the cable.
64084463
|
03
|
12/2017
Figure 2-27: IND246 POWERCELL Enclosure with POWERCELL Cable Gland and Grounding Point
•
Preparing of the cable and gland
•
External connection and grounding of the cable
•
Internal connection and grounding of the cable.
Figure 2-29: Measuring the Exterior Braided Armor Before Cutting
METTLER TOLEDO IND246 and IND246 POWERCELL Installation Manual
Figure 2-28: Cut POWERCELL Cable
External
grounding
point
POWERCELL
cable gland
2-19