Attaching Brackets And Mounting Terminal - Mettler Toledo IND246 Guia De Instalacion

2.3.3.

Attaching Brackets and Mounting Terminal

64084463 | 03 | 12/2017
1. Once the enclosure is closed, use the four screws to attach the brackets to the bottom of the
terminal, as shown in Figure 2-13.
Figure 2-13: Attaching the Wall-Mounting Bracket
2. Mark the position of the bracket mounting holes on the surface to which the terminal will be
mounted per the dimensions shown in Figure 2-14, or by holding the terminal up to the
surface and marking through the bracket holes.
Figure 2-14: Template for Harsh Terminal Mounting
3. The hardware to mount the terminal bracket to the vertical surface is not included with the
terminal—it must be supplied locally. Ensure that the mounting hardware is capable of
supporting the weight of the terminal, which is approximately 2.6 kg (5.8 lb). Using the
locally supplied hardware, secure the terminal bracket to the surface.
METTLER TOLEDO IND246 and IND246 POWERCELL Installation Manual 2-9