Safety Devices On Board The Machine - Nogueira NEW PECUS G2 Serie Manual De Instrucciones

2.1- Safety devices on board the machine

In the development of the design, fixed safety protections have been adopted in
hazardous areas of operation. All guards are fully shielded to prevent access to risky
points. This measure aims to guarantee protection to operators and other people
involved with the operation of this machine.
Never use the machine without the safety guards! Replace damaged safety shields
immediately.
NOTE!
In accordance with Regulatory Standard NR-12, "fixed protection" is considered
to be the element specifically used to provide safety through a physical barrier.
It must be held in its position permanently or by means of fastening elements
that only allow its removal or opening with the use of tools.
A
A - Belt Safety Protection:
Fully shielded, designed to prevent any
contact with the belts during operation.
Risks of removal of this protection:
Contact with moving belts can lead to
serious injuries such as fractures, kinks,
etc.
In case of belt rupture, the protection
prevents people from being hit by
fragments.
B - Cardan safety protections:
Designed to prevent any contact with the
cardan during operation.
Removal risk of this protection:
Contact with moving cardan shafts can
lead to serious injuries such as fractures,
kinks, mutilation, etc., which could lead
to death.
Instructions Manual
2. Safety
B
B
19