Description; Overview - MSA ALTAIR 5X Manual De Uso

2

Description

2.1

Overview

1
7
6
5
Fig. 1 Device view
LEDs
1
2 red "Alarm", 1 green "Safe" and 1 yellow "Fault"
2 Horn
3 Display

4 Button
5 Button
q
6  Button
7 Bluetooth Status LED
The device monitors gases in ambient air and in the workplace.
The ALTAIR 5X is available with a maximum of four sensors, which can display readings for five sepa-
rate gases (one Two-Tox Sensor provides both CO and H
single package).
The ALTAIR 5X IR is available with a maximum of five sensors, which can display readings for six
separate gases (one Two-Tox Sensor provides both CO and H
in a single package).
The ALTAIR 5X and ALTAIR 5X IR Multigas Detectors are available with either a monochrome or color
display.
The alarm levels for the individual gases are factory-set and can be changed through the Instrument
Setup Menu. These changes can also be made through MSA Link Software. Ensure that the latest
version of the MSA Link software has been downloaded from MSA's website www.msasafety.com.
It is recommended that after making changes using MSA Link software, the device should be turned
OFF and ON.
US only: While the device can detect up to 30 % oxygen in ambient air, it is approved for use only up
to 21 % oxygen.
1
10
2
3
4
14
8 IRDA Communication port
9 Pump inlet
10 RFID tag
11 Filter
12 Belt Clip (ALTAIR 5X only)
13 Charging port
14 Charge Status LED
S or CO and NO
2
2
ALTAIR 5X/ALTAIR 5X IR
8 9
13
sensing capabilities in a
2
S or CO and NO sensing capabilities
2
Description
11
12
US
11