Alarm Setup - MSA ALTAIR 5X Manual De Uso

Setting Cal Due Options
(1) Press the q button to enter setup.
Press the  or  button to enable/disable this option.
(2)
(3) Press the q button to confirm.
(4) After confirmation the device prompts the user to enter the number of days for the reminder.
Change number of days by pressing the  or  button.
(5)
(6) Press the q button to go to the next menu.
Setting Last Cal Date
(1) Press the q button to enable/disable this option.
Press the  button to go to the next page.
(2)
(3) Press the  button to go to the previous page.
Setting Calibration Password
(1) Press the q button to enable/disable this option.
(2) Press the  button to go to the next page.
Press the  button to go to the previous page.
(3)
Back To Main Menu
(1) Press the q button to go to Device Setup Menu
 The Cal Options screen displays
Press the  button to go to the next (Alarm options) or the  button to exit the Setup menu.
(2)

Alarm Setup

ALARM OPTIONS
The Alarm Options Menu allows the user to:
-
enable/disable the vibrating alarm
-
enable/disable the audible alarm (horn)
-
enable/disable the Alarm LEDs
-
enable/disable the MOTIONALERT SELECTION page.
If disabled, the user cannot change the device MotionAlert setting.
-
set Sensor Alarms.
Press
-
the  button go to next page
the  button to go previous page
the q button to enter setup.
Setting Vibrating Alarm
Press the q button to enable/disable this option.
Setting Horn Alarm
Press q button to enable/disable this option.
Setting LED Alarm
Press q button to enable/disable this option.
ALTAIR 5X/ALTAIR 5X IR
Operation
US
33