Instrument Options - MSA ALTAIR 5X Manual De Uso

Fig. 9 Sensor Alarm Setup
(3) Set values for Sensor Alarm by pressing the  or  button.
(4) Press the q button to confirm set value.
(5) Repeat setting for all other sensors.
(6) Press the  button to return to the Alarm Options menu.
(7) Repeat setting for all other alarm types.

Instrument Options

SETTINGS
The Instrument Options menu allows modification of different device options:
-
Sensor Setup (enable/disable the channel)
-
Language Setup
-
Time Date Setup
-
Datalog Intervals
-
Stealth Mode
-
Operating Beep
-
Display Contrast (monochrome only)
-
Backlight Options
-
Bluetooth
Press
-
the  button go to next page
the  button to go previous page
the q button to enter setup.
Setting Sensor Options
(1) Press the q button to enter setup.
 Following screen displays:
Fig. 10 Sensor Options Setup
(2) Press the  button to select sensor, press the q button to make changes.
 The sensor information is displayed and the sensor can be enabled or disabled.
Other operations such as changing the gas type (Methane, Butane, Propane etc. for the
combustible sensor) and units (ppm to mg/m3) are only possible using the MSA Link
software.
ALTAIR 5X/ALTAIR 5X IR
Operation
US
35