Cleaning The Filter In The Chamber; Maintenance - Sirona DAC PROFESSIONAL Instrucciones De Uso

Chapter 7 – Maintenance

Cleaning the filter in the chamber

Remove the filter for inspection and cleaning by rotating it counterclockwise out of the opening.
1.
Rinse the filter with water to clean.
2.
Screw the filter back into the opening by rotating it clockwise.
3.
Please use the key supplied for the chamber filter to unscrew the chamber filter (Fig. 6/c).
Fig. 5 Chamber internal view

Maintenance

WARNING
Continuing operation despite maintenance messages can result in malfunctions in the
autoclave.
 Maintenance should only be performed by trained technicians from customer service or your
specialist supplier. Contact your specialist supplier for any maintenance.
 Adhere to the specified maintenance intervals.
To preserve the value of your autoclave and to ensure it continues to function reliably, regular
maintenance is essential.
This maintenance includes all testing and replacement where necessary of all components and electrical
systems that are relevant for function and safety. The autoclave must undergo maintenance after every
1000 program cycles or 2 years. The autoclave shows a maintenance message at the relevant time.
NOTE ABOUT THE INDUSTRIAL HEALTH AND SAFETY ORDINANCE
According to the German industrial health and safety ordinance (BetrSichV §15), facilities
operating pressure devices (such as autoclaves) are obliged to have their device inspected to
ensure proper condition. For this purpose we provide you with an appropriate guideline for
downloading from our Internet site under the "Service" menu. This shows you our
recommendations regarding which components must be inspected at which intervals.
36
(a) Filter condensate drain
(b) Chamber filter
(c) Key for chamber filter
a
b
Fig. 6Unscrewing the chamber filter
c