Cooking; Immediate Cooking; Changing The Temperature; Programming The Cooking Time - De Dietrich DOP7231A Guía De Utilización

3
•

COOKING

Before using your oven for the
first time, heat it at maximum
temperature
approximately 30 minutes. Make sure
that the room is sufficiently ventilated.
IMMEDIATE COOKING (fig. A)
The programmer must only display the
time. It should not be flashing.
Turn the function selector to any position.
The temperature starts to increase at
once. Your oven suggests a temperature,
which can be modified.
The oven heats up and the temperature
indicator flashes. A series of beeps
sounds when the oven has reached the
programmed temperature.
CHANGING THE TEMPERATURE(fig.
B)
When you are in the cooking mode of
your choice, press
Adjust the temperature with + or -.
Confirm by pressing

PROGRAMMING THE COOKING TIME

(fig. C)
Use the immediate cooking programme,
then press ; the cooking time
and it is now possible to set it. Press +
and - to adjust the cooking time. Confirm
by pressing .
Your oven has the "SMART ASSIST"
function which, when programming a
cooking time, will suggest a cooking time
which can be modified depending on the
selected cooking mode.
See the table below.
while empty
.
.
flashes
COOKING MODE
for
FAN OVEN
COMBINED OVEN
CONVENTIONAL OVEN
ECO
PULSED GRILL
VARIABLE GRILL
KEEP WARM
DEFROSTING
BREAD
The cooking time is saved automatically
after a few seconds. The time starts to
count down as soon as the cooking
temperature is reached.
DELAYED START (fig. D)
Proceed as for programmed cooking.
After setting the cooking time, press
The display flashes. Set the cooking end
time with + and - .
The cooking end time is automatically
saved after a few seconds. The cooking
end time display stops flashing.
8
RECOMMENDA-
TION
OF COOKING TIME
30 min
30 min
30 min
30 min
15 min
7 min
60 min
60 min
40 min
.