Software; Setting Up The Ethercat Interface In The Project - Festo 8108002 Instrucciones De Utilizacion

KUKA training cell for hands-on education in robotics – Application Kit

10 Software

®
10.1 Setting up the EtherCAT interface in the project
In the project under KUKA Extension Bus (SYS-X44), add the EtherCAT Device CPX-E-EC fieldbus module.
®
The project was created with WorkVisual 5.0. The EtherCAT interface is already preconfigured in the
®
project.
63
© Festo Didactic 8109530