Cleaning The Display; Cleaning The Control Panel; Technical Data - Bosch Drive Unit Speed Manual Original

If the motor is removed, e.g. for cleaning purposes, it
must not be held or carried by the cables under any cir-
cumstances, as otherwise there is a risk that the cable will
break.
If the motor has been removed from the frame of the
Pedelec, the plug from the motor and the socket of the
cable leading to the battery pack must be checked for
possible contamination and, if necessary, cleaned care-
fully with a dry cloth before reconnecting.

10.3 Cleaning the display

The contacts of the base plate should be cleaned periodi-
cally using a contact spray in order to ensure their functio-
nality.
The housing of the display may only be cleaned with a
damp (not wet) cloth.

10.4 Cleaning the control panel

The control panel can be cleaned with a damp cloth where
necessary.

11 Technical data

MOTOR
Brushless electric motor
Output
Maximum torque
Gross weight
of electric drive,
battery, control unit
Control
XION LI-ION BATTERY
Capacities
11 Ah
Voltage 36 V
Gross weight
2.85 kg
250 W rated output/
650 W maximum output
12 Nm rated torque/40 Nm
maximum torque
11 Ah 15.5 Ah
7.8 kg 7.8 kg
Via torque sensor and speed
sensor in the motor
15.5 Ah
36 V
2.85 kg
VIII User Manual Pedelec Xion 31