Atos Medical PROVOX LaryButton Instrucciones De Uso página 13

Preparing for insertion
Before first use check that you have the correct size and that
the package is not damaged or opened. Do not use otherwise.
Make sure that your hands are thoroughly clean and dry
before placing them in the area of the stoma or handling the
Provox LaryButton and/or accessories.
Have a mirror and sufficient light to illuminate the stoma.
Always carefully inspect the Provox LaryButton BEFORE
EACH USE (i.e. before insertion), and ensure that it is
undamaged and shows no signs of tears, cracks, or crusts. If
you detect any damage, do not use the product, and obtain a
replacement.
Before insertion, rinse the device with drinking water to
remove any disinfectant residues (Fig. 2). Make sure that you
only insert clean devices. In a hospital setting it is better to
use sterile water rather than drinking water.
If needed, lightly lubricate the Retention Collar of the device
with some water-soluble lubricant. The following water-soluble
lubricants are recommended for use with the Provox LaryButton:
• KY Jelly
®
• SurgiLube
• Xylocaine
CAUTION: Only use water-soluble lubricants. Oil-based
lubricants (e.g., Vaseline) may weaken damage or destroy the
product and should not be used at any time.
Make sure that you do not lubricate the HME Holder, HME
Cassette or any accessory which is to be held by the Provox
LaryButton, as this may lead to accidental detachment.
®
/(lidocaine)
®
13