English
1. Unlock all wheel locking levers to move workstation floorstand into optimal working position.
2. When optimal working position, push wheel locking levers down to secure.
3. To adjust optimal working height for horizontal swivel joint, first loosen vertical adjustment knob then lift vertical adjustment shaft to desired
height. Tighten vertical adjustment knob to secure.
WARNING
Ensure mounting system is secure.
n
4. Attach desired accessory to hex shaft.
5. Loosen arm locking knob to position arm.
6. Tighten arm locking knob to secure position.
Multi-Purpose Workstation™ Stabilizer
2