Intended Use; Prior To Use - Civco ACCUCARE Manual Del Usuario

Multi-Purpose Workstation™ Stabilizer LP (Single-Sided Mount)

INTENDED USE

The equipment is intended to provide fixation, support and manipulation of transrectal ultrasound imaging probes during insertion and final placement.
SETTING UP ARM (SINGLE-SIDED MOUNT)
1. Loosen rail clamp levers on table mount. Slide table mount onto table rail and tighten rail clamps levers to secure. Center Y adjustment.
2. Fit dovetailed mounting plate to mating stabilizer mounting plate on table mount. Secure with stabilizer quick connect knob.
FUNCTIONAL PREUSE CHECKS

PRIOR TO USE

Attach table mount at a suitable clasping point on table rails to ensure it remains securely in position.
n
Ensure stabilizer moves freely when locking knob is loosened and secures firmly when locking knob is tightened.
n
Perform table clearance check. Before indexing the table, make sure stabilizer and table mount do not interfere.
n
I. Stabilizer quick connect knob
II. Knob Y
III. Rail clamp
IV. Table rail
V. Rail clamp levers
VI. Stabilizer mounting plate
VII. Hex shaft attachment
VIII. Arm locking knob
1
English