Function of the keys
ON/OFF key
When the digital control panel is in position Off (switched off) one push
enables the switch on of the same.
When the digital control panel is "on", the continuous push for three
seconds enables shifting into "Off" (switched off).
TOP KEY / P1 PROGRAM
When the digital control panel is active (and the display shows the
average baking chamber temperature), pushing once the touch
programme 1 is taken back and signal "P1" is shown.
A minimum three seconds lasting push enables the modification of
top temperature set (of the selected programme).
BOTTOM KEY / P2 PROGRAM
When the digital control panel is active (and the display shows the
average baking chamber temperature), by pushing once the touch
Programme 2 is taken back and "P2" is shown.
A minimum three seconds lasting push enables the modification of
the bottom temperature (of the selected programme).
Increment Value Key / Visualization top temperature
When the display shows the average baking chamber temperature,
pushing once the touch top temperature is shown .
When programme modalities (p1 or p2) or other modalities active,
same touch enables the increase of the selected value.
Decrement Value Key / Visualization bottom temperature
When the display shows the average baking chamber temperature,
pushing once the touch bottom temperature is shown.
When programme modalities (p1 or p2) or other modalities, same
touch enables decrease of the selected value.
- 57 -