Setting The Date And Time - ChefLine PYRALIS Manual De Instrucciones


Use suitable instruments to bake in and displace the pizzas in the baking chamber, to avoid
burns.

When opening the door to bake the pizza/s, do not leave it opened for long time, to avoid heat
dispersion and consequently chamber temperature drop.

Avoid oil and fats to drop on bottom; if brought at high temperature can burn.
QUICK PROGRAM ACCESS
Press the TOP key to access the temperature setpoints related to program 1 (parameters P3 and
P4), press instead the BOTTOM key to access the temperature setpoints related to program 2
(parameters P5 and P6).
When pressing the TOP or BOTTOM key, the display shows the selected program for 5 seconds
(Pr 1 in green or Pr 2 in red).
The setpoints are updated when the label disappears.
If while Pr 1 or Pr 2 is displayed the TOP or BOTTOM key is pressed, this display will disappear
and the setpoints are updated.
With the card ON, press the TOP and BOTTOM keys for 3 seconds to display the program in use
for 5 seconds.
The selected program is maintained also if the card is set to OFF or if the power is interrupted.

SETTING THE DATE AND TIME

The date and time must be set when the expansion with RTC is used for delayed start (parameter
P20 = 2).
With the card OFF, press the CLOCK key for 3 seconds, and the display will show the label dd
followed by the day of the week from 1 to 7 (1= Monday, 7 = Sunday). Use the UP and DOWN
keys to set the day of the week and confirm by pressing the CLOCK key. Set the hours (label hh)
and minutes (label mm) in the same way. After confirming the minutes with the CLOCK key, the
card will return to OFF.
NOTE: if P20=2, but the correct expansion is not installed (with RTC) an error is displayed (RTC
label flashing) at the end of the date and time setting procedure.
SETTING DELAYED START
The delayed start can be set only when the card is on and the timer is not being used for counting.
Delayed start can be set for the same day and for the following 6 days (for example, on
Wednesday it is possible to set the programmed start until maximum next Tuesday). From the day
on which the first delayed start is set, the card will turn on EVERY DAY at the set time until the
delayed start is turned off.
Press the CLOCK key for 3 seconds, the display will show the flashing dd label followed by the
day of the week from 0 to 7 (0=delayed start off, 1=Monday, 7=Sunday). Use the UP and DOWN
keys to set the day of the week and confirm by pressing the CLOCK key. Set the hours (flashing
hh label) and minutes (flashing mm label) in the same way. After confirming the minutes with the
CLOCK key, the card will turn OFF and with the clock icon on and the central dotpoints flashing.
To display the programmed start date, press the CLOCK key and the day of the week, time and
minutes of the programmed start time will be displayed.
The card can be used by pressing the ON/OFF key and setting it to the on status.
If the card is turned off, the indication of the delayed start will be redisplayed (flashing dotpoints
and clock icon on).
To disable the programmed start, turn on the card, access the delayed start setting and disable it
by setting dd to zero.
NOTE: If the card turns on in error because the user forgot to turn off the daily delayed start, the oven will
turn off automatically after P23 hours after starting if no key is pressed. Set P23=0 to disable this function.
- 65 -