Example nr. 1 Top
modification of programme 1 (the same procedure is valid also for
programme nr. 2).
NOTE: That operation can be carried out only when the oven is
under working, i.e. after pushing the on/off touch.
210
P1
300
310
310
250
260
260
and
bottom
Being the panel on, the display shows the real
average baking chamber temperature (ex.
210°C).
Pushing once touch
(program 1).
Keeping the touch
seconds,
the
temperature for the programme p1 (ex. 300°C)
and the pertained symbol blinks
Push the touches
set temperature (ex. 310°C) and push again
confirm the value (or wait some to automatic save
the modified value).
Keeping the touch
seconds, the display shows the bottom set
temperature P1 (ex. 250°C) and the correspondent
symbol blinks.
Push the touches
bottom set temperature and to modify the bottom
set temperaturea (ex. 260°C) and push again
confirm the value (or wait for some seconds for the
automatic save of the modified value).
- 61 -
temperature
the display shows p1
pushed for at least three
display
shows
and
pushed for at least three
and
parameters
the
set
top
to modify the top
to modify the
to
to