HP 33440/HP
33449 COMBINED
SERVICE
MANUAL
Feed Drive Assembly
The Feed Drive Assembly is shown in
1. Remove the Main Motor and Drive
as described above.
Figure 6-18.
Assembly and the 57- and 19-Tooth Gears and Drive Shti
2.
Remove the right side Feed Roller Assembly mounting screw (1) and mrefilly push the right
end of the assembly out of the way to access the front-most Feed Drive Assembly mounting
screw.
3. Remove the screws (3) securing the Feed Drive Assembly and Mtiout.
1
L
Paper Control PCA Connector
DC Power Supply Connector
Figure 6-18. Feed Drive Assembly
6-23