HP LaserJet II Serie Manual De Instrucciones página 337

HP 33440/HP 33449 COMBINED SERVICE MANUAL
Create or E&t your
AUTOEXEC.BAT File
The fallowing procedure:
Puts into a file called AUTOEXEC.BAT the instructions
your computer needs to be able to
talk to the printer.
Uses the EDUN editor that comes with DOS.
. Works with either MS-DOS or PC-DOS operating
sy~ems. Most IBMand lBM-compatible
compaers use one of these operating systems. If your computer does not use either
MS-DOS or PC-DOS, contact your computer dealer for configuration instructions.
Step What to Do How
tO DO it
Uype the command in this procedure and press the Return
key, as indicated by ~.)
1 Turn on your comptier.
2 Turn on your printer.
3 Make sure you are in the CD\ ~
root diretio~ of the disk
from which you
boot your
computer.
4 Check to see ifthe DIR AWEXEC . WT H
AUTOEXEC.BAT file appears
in the listing.
5 If the message "file not
found" appears, go to step
7.
6 Make a backup copy of your
COPY A~E=C . DAT AWE=C . SAV ~
existing
AUTOEXEC.BAT
file. Name 1
AUTOEXEC.SAV. *
7
Look
for the files DIR *. COM @
MODE.COM and
EDLIN.COM in
your root
dire~ory.**
8 If MODE.COM and
EDLIN.COM appear in the
directoW listing, go to M.
9
If MODE.COM and Place your DOS disk in drive A and type the following
EDLIN.COM do not appear
commands:
in the directory listing, copy
COPY A: MODE. COM ~
them from your DOS disks
COPY A: EDLIN . COM~
to your root directo~.
.- -. m
lU tio Io~
*H you need to remver wur original AUTOEXEC.BATfile Iawr, w
COPY A~EXEC. SAV A~EXEC. WT
** MODE.COM and
EDUN,COM are on your original DOS dsks. MYOUhave a hard @sk,these fileSmay be in a subdiretiow.
A-14