HP LaserJet II Serie Manual De Instrucciones página 50

HP 33440/HP 33449 COMBINED SERVICE MANUAL
Menu Key
Enter/Wset Menu
Key
m
HP 33440 only:
HP 33449 only
Plus and Minus
Keys:
The (=) key is used to access both the Printing Menu and the
Configuration Menu (see Section 3-4). Printing Menu items can be
overridden through sotiare applications.
Briefly pressing the (=] key enters the Printing Menu. COPIES=
is displayed. Once the menu is entered, pressing the (=] key
wi~ step through the menu items. The Q and Q keys are used to
display choices (see the Q and Q keys below), and pressing the
ENTER/RESET MENU
key will save a selected menu item.
Holding down the (=) key until SYMSET= (HP 33440) or
AWO CONT= (HP 33449) is displayed (about 5 seconds) enters the
Configuration Menu. Once the menu is entered, pressing the [=)
key will step through the menu items. The Q and @ keys are used
to display choices (see the Q and Q keys below), and pressing the
(ENTER/RESET MENU)
key will save a selected menu item.
The
(ENTER/RESET MENU]
key has two modes:
/
Pressing the
(ENTER/RESET MENU)
key saves a menu selection. An asterisk
(*) will appear beside the item to indicate it is saved. When these new
--
settings tie effect is dependent on which printer is being used.
New setiings will not take effect until an 07 RESETis performed or an
'CE is sent from the host.
A new Printing Menu feature, Auto &et, is performed if the printer
determines th~t no buffered data and no temporary soft fonts or
temporary macros are currentiy present. If buffered data, temporary
fonts, or temporary macros are present and a new Printing Menu item
is selected, the display will show 10 RESETTO SAVEwhen the printer
is returned to on-line status. New settings will not take effect until an
07 RESETis performed or an 'CE is sent from the host. Pressing and
holding the (~) key until 07 RESETappears will invoke the new
Printing Menu setiinge but buffered data and temporary soft fonts and
temporary macros will be lost. Pressing the (~j or (~j key
will save the data but the Printing Menu items will not be in effect. (The
display will show the selected change but the current printer settings are
not changed.)
Holding down the (-) key at least MO seconds until 09 MENU
RESETis displayed returns Printing Menu settings to factory default
settings and pu~ these settings in effect. It dso clears temporary soft
fonti, temporary macros, and any stored page data.
Once the desired menu item has been reached, these keys step through
the available choices. For example, if the display window shows COPIES
= 03 (HP 33449: COPIES= 3), pressing the Q key will change the
message to COPIES= 04 (HP 33449: COPIES= 4). Pressing the ~ key
will change the message to COPIES= 03 (HP 33449: COPIES= 3) again.
Holding down either of these keys will scroll through the available choices
for each menu item.
3-1o