HP LaserJet II Serie Manual De Instrucciones página 355

HP 33440/HP 33449 COMBINED SERVICE MANUAL
,--
The following procedure:
Puts the instructions your computer needs to be able to talk to the printer into a file
called AUTOEXEC.BAT.
Uses the EDLIN editor that comes with DOS.
Works with either MS-DOS or PC-DOS
operating
systems. Most IBM and
lBM-compatible computers use one of these operating systems. If your computer
does not use either MS-DOS or PC-DOS, contact your computer dealer for
configuration instructions.
Step What to
DO
How to
DO h
UYW the command in this
procedure and press the Return
key, as indiwted by Q.)
1
I
Turn on vour ~rinter. I
2 ] Turn on vour mm~uter. I
3 Make sure you are in the root
CD\ ~
diresto~ of the
disk fromwtich
you
boot your mmputer.
4
Chwk to see if the
DIR
AUTOEXEC . BAT~
AUTOEXEC.BAT file appears in
the hsting.
5
If the message "File not found
t
appears, go to step 7.
I
s
1
1
1
8
'+
r
I
6
Make a backup mpy of your
COPYAUTOEXEC . BATAUTOEXEC . SAV~
existing AUTOEXEC.BAT file.
Name k AUTOEXEC.SAV.*
7 Look for the files MODE.COM
DIR * . COM @
and EDLIN.COM in your root
dke@ory.**
6 If MODE.COM and EDLIN.COM
aPPear in the dkedory listing,
goto @.
9
If MODE.COM and EDLIN.COM Place your DOS disk ic drive A and ~pe the follow'ng
do not appear
commands:
in the dir-ory tisting, copy
COPY A:MODE.
COM @
them from your DOS disks to
your root dir~ory.
COPYA: EDLIN . COM m
. --
10
GO to Q.
I
I
*lf you need to recoveryour original AUTOEXEC.BATfile later, type: COPY AUTOEXEC.SAV AUTOEXEC, BAT
** MODE,COM and EDLIN,COM sre on YourOriginalDOS di~k~, ~ you have a hard ~~k, these files
may be
in a subdiretiory,
B-15