HP LaserJet II Serie Manual De Instrucciones página 358

HP 33440/HP 33449 COMBINED SERVICE MANUAL
Was your mmputer or printer on when you connected your interface @le?
Turn off your computer and printer, wait 1S seconds, and turn them on again. Continue with@.
Is the interface port configured correctlfl
- Your cable may not be connected to LPT1 for a parallel interface or COM1 for a serial interface.
Try worting through 9, @ , and @ again, substituting LPT2 if you have a parallel interface,
or COM2 if you have a serial interface.
Are all of the cables and power cords attached properlfl
- Check all of the connections.
Is the On Line indicator on the printer control panel lit?
- If not, press the On Line key.
. Is the printer working properl~ Run the self-test described in o.
- If necessa~, call your HP Dealer or HP Sales Representative.
Is your mmputer working proped~
- Run an apphcation that works.
- If necessary, all your computer dealer or manufacturer.
Have you sat up the control panel proparlfl
- Hold down the Menu key for about 5 sewnds until the AUTO CO~= OFF* appears in the
display window. Then step through the configuration settings,
If necessary, repeat O for a parallel interface or @ for a serial interface, and continue through
the rest of this Guide.
Hav9 you set up your AUTOEXEC.BAT file properl~
Type
TYPEAUTOEXEC. BATonYour ComPUter and press ~ . Check t he fisting for
errors
in the fine or lines you added.
If necessary, repeat ~, ~, and @.
D(, you have the correct printer mble?
Chti ~ for:1 parallel interface or serial interface @bles.
- If necessary, obtain the correct @ble.
If you still need help...
Consuk your &rJet Ill Uaafs Manual.
Cdl the HP D~er from ~om you
purdssed your LaearJ@ Ill.
Call H4ett-Packards Pemoti
Peripherals Assist tine for help.
Enter your Dedefs number here
(208) 32%2551
ZW am. to 6W p.m. Mountain time
(ZW a.m. to 4~ p.m. Wednesday)
B-18