HP LaserJet II Serie Manual De Instrucciones página 159

HP 33440/HP 33449 COMBINED SERVICE MANUAL
Detivery Assembly
1.
2.
3.
4.
5.
6.
7.
8.
9.
Remove the hinged Top Cover &sembly from the printer.
Remove the black pltic Fuser Initiating Cover covering the Detivery Asembly (see above).
Remove the Erase Lamp &sembly cover (1) and mnnector screws (2).
Remove the Erase Lamp Connedor b.
With the Top Cover &sembly resting upside down on the work are% remove the screws (5)
securing the EP-S Cartridge Guide and remove the Guide from the Top Cover Asembly.
(Wfie disturbance to the Top Cover Asembly to prevent damage to the Wrror Asembly.)
Remove the Lower Detivery Cover screws (2, bla&) and Defivery &sembly mounting screws (4)
(see Figure 6-45).
Lift the Detivery &sembly, with the Lower Dehvery Cover, free of the Top Cover &sembly.
Detach the Lower Defivery Cover from the Detivery Asembly by removing the brass-colored
screws (2).
Separate the Detive~ Coupler hsembly from Detivery &sembly.
When reintifing the Defivery &sembly, position the Dehvery Coupler &sembly as shown in
Figure 6-4. When reinting the Cartridge Guide, be sure to position the ~rror &sembly
mounting slots properly (see Figure 6-42).
Delivery CouplerAssembly
1. Open the Top Cover &sembly and remove the EP-S Cartridge.
2. Remove the Fusing &sembly and Fuser Initiating Cover as described above.
3. Remove the Detivery Coupler Asembly mounting screw (1) and lift it out (see Fl~re 6-45).
Figure 6-45. Delivery Assembly Removal
6-50